codeforces-scrape

Codeforces scraped problems and editorials
git clone git://git.laack.co/codeforces-scrape.git
Log | Files | Refs | README

916.md (9000B)


      1 Source: https://codeforces.com/blog/entry/57223
      2 
      3 I would like to take this opportunity to express my deepest apology to all of you who take your own precious time to participate in this unrated round. Also, apologies to [vintage_Vlad_Makeev](/profile/vintage_Vlad_Makeev "International Grandmaster vintage_Vlad_Makeev") who really helped a lot in preparing the round and [MikeMirzayanov](/profile/MikeMirzayanov "Headquarters, MikeMirzayanov") who helped to host the round, I did not do a good job in managing the round. As the main author of this round, I'm undoubtedly responsible for the mistake that not writing a brute force solution to test the correctness of the intended solution. It is my responsibility to make sure everything is right before the round starts. I am really sorry that the round must be unrated to ensure fairness to all contestants.
      4 
      5 I hope all of you can learn something from the contest. Do not claim a greedy solution absolutely correct (like me :C) unless you have proved it. On the bright side, I'm really glad that some of you found problem D and E interesting as said in some comments in the announcement blog post. I admit that problem D may seem to be a quite standard data structure problem but we think it would be fun for less experienced contestants to think how to put the concepts learnt together.
      6 
      7 Just a little unimportant fact: The original div2B problem was a harder data structure problem which involves a slightly complicate mathematical proof (which the current one doesn't have :C). We replaced it because it is too difficult for div2B as the coordinator suggested.
      8 
      9 #### [916A - Jamie and Alarm Snooze](/contest/916/problem/A "Codeforces Round 457 (Div. 2)")
     10 
     11 idea: [STommydx](/profile/STommydx "Candidate Master STommydx"), preparation: [southball](/profile/southball "Expert southball")
     12 
     13 Let's use brute force the find the answer. We first set the alarm time as *hh*: *mm* and initialize the answer as 0. While the time is not *lucky*, set the alarm time to *x* minute before and add 1 to the answer.
     14 
     15 Why does this solution run in time? As *x* ≤ 60, *hh* decrease at most 1 for every iteration. Also, after at most 60 iterations, *hh* must decrease at least once. All time representation that *hh* = 07 (07:XX) is lucky so at most 24 times decrement of *hh* will lead to a lucky time. Therefore, the max. number of iteration possible is 24 * 60 = 1440 which is very small for 1 sec TL.
     16 
     17 In fact, the largest possible answer is 390 where *x* = 2, *hh* = 06 and *mm* = 58.
     18 
     19 My implementation: [34342125](/contest/916/submission/34342125 "Submission 34342125 by STommydx")
     20 
     21 #### [916B - Jamie and Binary Sequence (changed after round)](/contest/916/problem/B "Codeforces Round 457 (Div. 2)")
     22 
     23 idea: [southball](/profile/southball "Expert southball"), preparation: [STommydx](/profile/STommydx "Candidate Master STommydx")
     24 
     25 The main idea of the solution is 2*x* = 2·2*x* - 1, that means you can replace 1 *x* element with 2 (*x* - 1) elements. To start with, express *n* in binary — powers of two. As we can only increase the number of elements, there is no solution if there exists more than *k* elements.
     26 
     27 Let's fix the *y* value first. Observe that we can decrease the *y* value only if all *y* can be changed to *y* - 1. So we scan from the largest power and try to break it down if doing so does not produce more than *k* elements. After *y* is fixed, we can greedily decrease the smallest element while the number of elements is less than *k*.
     28 
     29 My implementation: [34342011](/contest/916/submission/34342011 "Submission 34342011 by STommydx")
     30 
     31 #### [916C - Jamie and Interesting Graph](/contest/916/problem/C "Codeforces Round 457 (Div. 2)")
     32 
     33 idea: [STommydx](/profile/STommydx "Candidate Master STommydx"), preparation: [STommydx](/profile/STommydx "Candidate Master STommydx")
     34 
     35 First, observe that only *n* - 1 edges are required to fulfil the requirement, so we will make the other *m* - *n* + 1 edges with a very large number so they would not contribute to the shortest path or the MST. Now, the problem is reduced to building a tree with prime weight sum and two nodes in the tree have prime distance.
     36 
     37 Recall that a path graph is also a tree! If we join (*i*, *i* + 1) for all 1 ≤ *i* < *n*, the shortest path will lie on the whole tree. We are left with a problem finding *n* - 1 numbers that sum to a prime. Let's make 1 edge with weight *p* - *n* + 2 and others with weight 1. Choosing a prime slightly larger than *n* (e.g. 100003) will fulfil the requirement for all cases.
     38 
     39 My implementation: [34342305](/contest/916/submission/34342305 "Submission 34342305 by STommydx")
     40 
     41 #### [916D - Jamie and To-do List](/contest/916/problem/D "Codeforces Round 457 (Div. 2)")
     42 
     43 idea: [STommydx](/profile/STommydx "Candidate Master STommydx"), preparation: [STommydx](/profile/STommydx "Candidate Master STommydx")
     44 
     45 Let's solve a version that does not consist of undo operation first. The task can be divided to two parts: finding the priority of a string and finding the rank of a priority. Both parts can be solved using trie trees. The first part is basic string trie with get and set operation so I will not describe it here in details. The second part is finding a rank of the number which can be supported by a binary trie.
     46 
     47 To support the undo operation, observe that each operation only add at most 31 nodes to the trie trees. Therefore, we can make use the idea of persistent data structure and store all versions by reusing old versions of the data structure with pointers. Remember to flush the output after each query operation.
     48 
     49 As pointed out by some of you, there exists alternative solutions using persistent dynamic segment trees.
     50 
     51 My implementation: [34342389](/contest/916/submission/34342389 "Submission 34342389 by STommydx") (sorry for a bit messy)
     52 
     53 #### [916E - Jamie and Tree](/contest/916/problem/E "Codeforces Round 457 (Div. 2)")
     54 
     55 idea: [longhuenchan](/profile/longhuenchan "Candidate Master longhuenchan"), preparation: [longhuenchan](/profile/longhuenchan "Candidate Master longhuenchan")
     56 
     57 Let's solve the problem without operation 1 first. That means the subtree of a vertex does not change.
     58 
     59 For operation 2, the subtree of smallest size that contains *u* and *v* means the lowest common ancestor (*lca*) of *u* and *v*, and we update the subtree of *lca*. For operation 3, we query the sum of the subtree rooted at the given vertex. To do this, we can flatten a tree into an one dimensional array by considering the DFS order of the vertices starting from vertex 1. If a vertex has DFS order *x* and its subtree has size *y*, then the update/query range is [*x*..*x* + *y* - 1]. This can be done by standard data structures, such as binary indexed tree with range update function, or segment tree with lazy propagation.
     60 
     61 Things get more complicated when the root of the tree *r* changes. One should notice that in order to reduce time complexity, we should not recalculate everything when *r* changes. We just need to keep a variable storing the current root. Now let's discuss the two main problems we face (In the following context, subtree of a vertex is defined according to vertex 1 unless otherwise stated):
     62 
     63 How to find the LCA of *u* and *v* using the precomputed LCA table that assumes the root is vertex 1? Let's separate the situation into several cases. If both *u* and *v* are in the subtree of *r*, then query the LCA directly is fine. If exactly one of *u* and *v* is in the subtree of *r*, the LCA must be *r*. If none of *u* and *v* is in the subtree of *r*, we can first find the lowest nodes *p* and *q* such that *p* is an ancestor of both *u* and *r*, and *q* is an ancestor of both *v* and *r*. If *p* and *q* are different, we choose the deeper one. If they are the same, then we query the LCA directly. Combining the above cases, one may find the LCA is the lowest vertex among *lca*(*u*, *v*), *lca*(*u*, *r*), *lca*(*v*, *r*).
     64 
     65 After we have found the origin *w* of update (for query, it is given), how to identify the **subtree of a vertex** and carry out updates/queries on it? Again, separate the situation into several cases. If *w* = *r*, update/query the whole tree. If *w* is in the subtree of *r*, or *w* isn't an ancestor of *r*, update/query the subtree of *w*. Otherwise, update/query the whole tree, then undo update/exclude the results of the subtree of *w*', such that *w*' is a child of *w* and the subtree of *w*' contains *r*.
     66 
     67 The above ideas can be verified by working with small trees on paper.
     68 
     69 [longhuenchan](/profile/longhuenchan "Candidate Master longhuenchan")'s implementation: [34352491](/contest/916/submission/34352491 "Submission 34352491 by longhuenchan")
     70 
     71 We are glad to see some more elegant implementations by the contestants.
     72 
     73 Feel free to discuss the problems below. I am happy to listen to feedback and answer questions from you guys. :)